Corrosion-resistant Titanium Alloy Plate Silver GR1 For Titanium
AMS4911, AMS4916 etc.
GR1 GR2 GR3 GR5
Thickness ( 0.3--50)mm
Place of origin: China (Mainland)
Standard: ASTM B265,AMS4911, AMS4916
Technique: hot rolled or cold rolled
Grade:GR1,2,3,5 ,Ti-811, Ti-55 Ti-15333
It has a low density and is a strong, lustrous, corrosion-resistant
(including sea water,
aqua regia and chlorine) transition metal with a silver color
Applications for titanium mill products (sheet, plate, bar, wire,
forgings, castings) can be
found in industrial, aerospace, recreational, and emerging markets.
Powdered titanium is
used in pyrotechnics as a source of bright-burning particles.
Gr1 can be used in the drawing parts for its good elongation and
Gr2. The pure titanium most used. The best combination of strength,
ductility and weldability.
Gr3 is almost used in pressure vessel
Gr4 can be used in some fitting parts and fastening pieces, but for
need 300 degree Celsius to form
Gr5. The most manufactured titanium alloy. Exceedingly high
strength. High heat resistance
GR.7 (Ti-0.2Pd) adds little palladium in cp titanium and it has the
most e xcellent corrosion-resistance, of course it costs
higherSuperior corrosion resistance in reduce and oxidizing
GR.9 (Ti-3AL-2.5V) is the most widely used in the golf clubs and
Gr12. Better heat resistance than pure Titanium. Applications as
for Grade 7 and Grade 11.
Gr23. Ti-6Al-4V ELI Alloy for surgical implant Applications.